Battery Disposal - Duwi gong de base Ritmo Mode D'emploi

GB
13. help
Defect
Gong does not operate
Gong does not operate
When operating with the radio module:
no function
When operating with the radio module:
gong sounds without a radio trigger from
the transmitter
When operating with the radio module:
no signal trigger from transmitter
When operating with the radio module:
no signal trigger from transmitter
No operation with USB-module
USB-module does not play the stored
melodies correctly
Melodies from the sound module are not
played
A different melody is played than before
after the batteries have been replaced
14. cleANING
Only use a slightly moist cloth to clean the surface, or if necessary a very cleaning agent. Do not use any scouring or solvent cleaning
agents.
15. wARRANty
Warranty claims conform to legal requirements. Technical changes reserved.

16. BAtteRy DIspOsAl

Dear customer,
Please note
carefully:
Batteries and accumulators
are not to be disposed of in
the normal house waste bin
Every user is legally obliged, to hand over
all batteries and accumulators, irrespective
of whether or not they contain harmful
substances *) to a communal collection
point in the local town area or to a trade
dealer so that they can be disposed of in an
orderly environmentally friendly manner.
Batteries and accumulators should only be
handed over when they are completely
discharged!
*) designated with Cd = Cadmium Hg = mercury Pb = lead
Your battery product development 05.03DS
cause
Batteries perhaps empty
Batteries perhaps inserted incorrectly
Incorrect coding
Possible other radio signals on the same
code
Batteries possibly empty
Batteries perhaps inserted incorrectly
USB inserted incorrectly
Possibly incorrect file format
Sound module not inserted correctly
Play data store has been deleted
Remedy
Replace 4 x .5 V LR4 baby batteries
Insert batteries as shown taking care to
ensure correct polarity
Ensure transmitter and receiver are set to
the identical code
Alter both the transmitter and receiver to a
different identical code
Replace 2 x .5 V AAA micro batteries
Insert batteries as shown taking care to
ensure correct polarity
Remove the USB-module and refit it
correctly
Check to ensure the files on the USB-mo-
dule correspond with the file formats listed
in the characteristics
Remove the sound module and refit it
correctly
The gong must be set again using the
selection keys
2