Setting The Sequence Time; Channel Settings - Abus TVAC21000 Manuel Utilisateur

OSD DISPLAY
Specifies whether or not the camera name and the time are displayed in the live view.
SCREEN POSITION
You can raise or lower the X (horizontal) and Y (vertical) values to move the displayed image on the
screen (X: -4 to 3; Y: -10 to 10).
BORDER COLOR
Changes the colour of the border on the screen.
The following colours are available: BLACK, GREY1, GREY2, WHITE and OFF.

8.3 Setting the sequence time

You can define the dwell time for each channel here ("OFF"–99).
If a camera is disconnected, this channel is automatically skipped in the sequencing.

8.4 Channel settings

AUTOSEQ TIME SETUP
CH 1-4: 01S
CH 1: 01S
CH 2: 01S
CH 3: 01S
CH 4: 01S
↑↓ Select + - Adjust
Fig. 7: Sequence time settings
CHANNEL SETUP
CH: 1
TITLE:
BRIGHTNESS:
CONTRAST:
SATURATION:
HUE:
↑↓ Select + - Adjust
Fig. 8: Channel settings
VER 1.20
VER 1.20
CH01
-20
+20
0
0
32
English
EXIT
EXIT