System Design; Function Description; Switching On; Live View - Abus TVAC21000 Manuel Utilisateur

6. System design

Master
Monitor
VCR

7. Function description

7.1 Switching on

Every time the device is started, it goes through a warm-up phase and runs a self-test.
It first checks whether cameras are connected to the input sockets. If not, "LOSS" appears in the
corresponding sector of the display. If cameras lose the connection to the Quad, "LOSS" appears in the
corresponding sector of the display.

7.2 Live view

Full-screen view:
Press one of the channel keys 1–4 to select a channel for the full-screen display.
Quad image display:
Press the [QUAD] key to see all four channels in quad mode.
Freeze function:
You can now press channel keys 1–4 and also press the [FREEZE] key to see a frozen image from the
selected channel.
PIP (Picture In Picture) / POP (Picture On Picture):
Press [MODE] to activate the PIP/POP function.
You can change the type of display by pressing several times
•
Press the [MODE] key once: PIP with 3 pictures (1 large picture, 2 small pictures)
•
Press the [MODE] key twice: PIP with 2 pictures (1 large picture, 1 small picture)
•
Press the [MODE] key three times: POP with 2 pictures (1 picture on the left, 1 picture on the
right)
RELAY OUT VIDEO OUT
MONITOR QUAD VCR
COM/NO/NC
OUT OUT IN
VIDEO IN POWER IN
DC 12V
4 3 2
1
Kamera 3
Kamera 4
27
English
Kamera 1
Kamera 2