DeWalt DXGP210 Manuel De L'utilisateur page 33

5. Make sure the saw chain is still in the guide bar groove. Adjust the chain tension. Refer to Adjusting
the Chain Tension.
6. Install the bar cover. Tighten the screw and two (2) bar-retaining nuts.
Bar Cover
Guide Bar Groove
Screw
Drive Sprocket
Slot
Bar-Retaining Nuts
Fig. 15
Direction of Rotation
Fig. 16
Bar-Retaining Studs
Fig. 17
33
Cutter
Saw Chain Flat
Saw Chain
Guide Bar