Hot Surface - DeWalt DXGP210 Manuel De L'utilisateur

SYMBOL
DO NOT USE E85 FUEL IN THIS UNIT
CAUTION:
10% ethanol will likely damage this engine and void the warranty.
ON / OFF STOP CONTROL
ON / START / RUN
ON / OFF STOP CONTROL
OFF or STOP
PRIMER BULB
Push primer bulb, fully and slowly, 10 times.
THROWN OBJECTS CAN CAUSE SEVERE INJURY
WARNING:
causing injury.
KEEP BYSTANDERS AWAY
Min. 50 ft
WARNING:
least 50 feet (15 m) from the operating area.
15 m

HOT SURFACE

WARNING:
burned. These parts get extremely hot from operation. When turned off, they
remain hot for a short time.
DO NOT REPLACE CUTTING HEADS WITH BLADES*
WARNING:
not replace the cutting head with rigid or metal blades.
*This warning does not apply to units equipped with blades, such as edgers and
brush cutters.
MEANING
It has been proven that fuel containing greater than
Small objects can be propelled at high speed,
Keep all bystanders, especially children and pets, at
Do not touch a hot muffler or cylinder. You may get
When using a trimmer, to prevent serious injury, do
13