FEIG Electronic MWD BPC-H Mode D'emploi page 51

MWD BPC-H / MWD BPC-HU
P. [Unit]
Range
P.B45
P.B4C
P.B55
P.B5C
0 ... 3
P.B85
P.B8C
P.B95
P.B9C
P.B46
P.B4D
P.B56
P.B5D
P.B86 0 ... 3
P.B8D
P.B96
P.B9D
P.B3A
P.B3B
P.B3C
P.B3D
P.B35
P.B36
P.B37
B.B38
P.B40
P.B50
1, 2, 4, 5, 6
P.B80
P.B90
FEIG ELECTRONIC GmbH
Use with older controllers
Function Description/Note
Cross traffic to the motion detector can be suppressed.
This parameter specifies the cross traffic suppression
detection accuracy.
Cross traffic
suppression
complex movings detected, there can appear in some
cases dysfunctions in cross traffic suppression.
A detected object can be tracked by the motion detector
even if it is moving very slowly. The sensitivity is specified
with this parameter.
Object tracking
such as, e.g. leaves, rain or snow can cause
continuous activation.
Serial number
This parameter displays the serial number of the motion
motiond detector
detector 1, 2, 3 or 4.
1, 2, 3 or 4
Software version
This parameter displays the software version of the
motion detector
motion detector at the position 1, 2, 3 or 4.
1, 2, 3 or 4
MWD
Several parameters are set simultaneously to frequently
convenience
occurring convenience functions with profiles.
profiles
51/74
0: deactivated
1: low
2: medium
3: high
Because there are many different objects with
0: deactivated
1: low
2: medium
3: high
If this function is activated, minor movements
MWD_BPC-H-HU_ver4_Manual_rev0_mul
EN