FEIG Electronic MWD BPC-H Mode D'emploi page 46

EN
P. [Unit]
Range
L.62E 0 ... 6
L.72E
L.82E
L.92E
L.62F 0 ... 3
L.72F
L.82F
L.92F
L.630 0 ... 3
L.730
L.830
L.930
FEIG ELECTRONIC GmbH
List of the service parameters
Function
Vehicle filter This parameter specifies the probability with which
exclusively vehicles and not persons are detected.
0:
1:
....
4:
....
6:
movings detected, there can appear in some cases
dysfunctions in the vehicle filter.
The vehicle filter can only be activated if the
approaching detection direction has been set.
Cross-traffic Cross traffic to the motion detector can be suppressed.
suppression This parameter specifies the cross traffic suppression
detection accuracy.
0:
1:
2:
3:
movings detected, there can appear in some cases
dysfunctions in cross traffic suppression.
Object tracking A detected object can be tracked by the motion detector
even if it is moving very slowly. The sensitivity is specified
with this parameter.
0:
1:
2:
3:
If this function is activated, small movements such as
leaves, rain or snow can cause continuous activation.
46/74
Description/ Note
deactivated
low (vehicles and persons)
medium
high (only certainly detected vehicles)
Because there are many different objects with complex
off
low
medium
high
Because there are many different objects with complex
off
low
medium
high
MWD_BPC-H-HU_ver4_Manual_rev0_mul
MWD BPC-H / MWD BPC-HU