FEIG Electronic MWD BPC-H Mode D'emploi page 45

MWD BPC-H / MWD BPC-HU
P. [Unit]
Range
L.625 0 ... 3
L.725
L.825
L.925
7.1.2 Motion detector, channel 2
Table 9: Motion detector, channel 2
P. [Unit]
Range
L.62B 1 ... F
L.72B
L.82B
L.92B
L.62C 0 ... 2
L.72C
L.82C
L.92C
L.62D 0 ... 6
L.72D
L.82D
L.92D
FEIG ELECTRONIC GmbH
List of the service parameters
Function
Object tracking A detected object can be tracked by the motion detector
even if it is moving very slowly. The sensitivity is specified
with this parameter.
If this function is activated, small movements such as
leaves, rain or snow can cause continuous activation.
Function
Sensitivity This parameter defines the sensitivity for the channel to be
parameterized.
Direction detection This parameter specifies wether the motion detector reacts
to approaching or departing objects.
If the vehicle or human filter is activated, only
directional detection direction is permitted. Changes to
the setting "detection direction" will be blocked.
Human filter This parameter specifies the probability with which
exclusively persons and not vehicles are detected.
movings detected, there can appear in some cases
dysfunctions in the human filter.
The human filter can only be activated if the
approaching detection direction has been set.
45/74
Description/ Note
0: off
1: low
2: medium
3: high
Description/ Note
1: low ... F: high
0: deactivated
1: approaching
2: departing
0: deactivated
1: low (persons and vehicles)
....
4: medium
....
6: high (only certainly detected humans)
Because there are many different objects with complex
MWD_BPC-H-HU_ver4_Manual_rev0_mul
EN