FEIG Electronic MWD BPC-H Mode D'emploi page 44

EN
P. [Unit]
Range
L.622 0 ... 6
L.722
L.822
L.922
L.623 0 ... 6
L.723
L.823
L.923
L.624 0 ... 3
L.724
L.824
L.924
FEIG ELECTRONIC GmbH
List of the service parameters
Function
Human filter This parameter specifies the probability with which
exclusively persons and not vehicles are detected.
0:
1:
....
4:
....
6:
Because there are many different objects with complex
movings detected, there can appear in some cases
dysfunctions in the human filter.
The human filter can only be activated if the
approaching detection direction has been set.
Vehicle filter This parameter specifies the probability with which
exclusively vehicles and not persons are detected.
0:
1:
....
4:
....
6:
Because there are many different objects with complex
movings detected, there can appear in some cases
dysfunctions in the vehicle filter.
The vehicle filter can only be activated if the
approaching detection direction has been set.
Cross-traffic Cross traffic to the motion detector can be suppressed.
suppression This parameter specifies the cross traffic suppression
detection accuracy.
0:
1:
2:
3:
Because there are many different objects with complex
movings detected, there can appear in some cases
dysfunctions in cross traffic suppression.
44/74
Description/ Note
deactivated
low (persons and vehicles)
medium
high (only certainly detected humans)
deactivated
low (vehicles and persons)
medium
high (only certainly detected vehicles)
off
low
medium
high
MWD_BPC-H-HU_ver4_Manual_rev0_mul
MWD BPC-H / MWD BPC-HU