Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not obstruct the ventilation grille
at the bottom of the front of the
appliance, otherwise sufficient flow of
cooling air cannot be guaranteed.
Keep the area surrounding the dryer
►
free of dust and fluff.
Fixing set
For installation on slippery ground, e.g.
installation base with tile surface, two
self-adhesive receptacles secure the
machine from shifting.
You can purchase the following fixing
sets at your specialist retailer or
through our customer services team:
Steel fixing set – to be drilled
►
Order No: 520 510
Plastic fixing set – to be glued
►
Order No: 512 15
Keep machine dimensions in mind
The minimum distance between the
machine and the wall or possibly an-
other machine is 1 cm.
Important
The machine must be placed with its
back against a wall.
Aligning the appliance
Align the appliance with the help of
►
a spirit level. Otherwise, the machine
may wander and cause damage or lose
condensation water.
Notice
The machine must be in a vertical
position with all four feet firmly on the
floor and it must not wobble.
EN 31
Publicité
Table des Matières
