Starting The Programme; Interrupting The Programme; Programme End; Removing The Laundry - Schulthess Spirit TopLine TC 6697 Mode D'emploi

Changing a programme before the start
u Press the desired programme button again.
l All control lights for the available additional functions
flash again and all settings are deleted.
u Select any additional functions.
u Start the programme.

Interrupting the programme

u Interrupt the programme by pressing the fast forward
button repeatedly, until «programme end» appears on
the display.
If the child lock is activated:
u Hold the start button down.
u Simultaneously tip the fast gear key.
Adding more laundry
This is possible at any time.
u Press the door open button.
l Wait for the drum to stop.
u Add your laundry.
u Close the door again.
u Press the start button.
If the child lock is activated:
u Hold down the start and fast forward buttons at the
same time.
u The drying process is continued.

Programme end

The programme end is indicated by the display value
00:00h, the display of «Programme End» as well as a
flashing control light.
l An audible signal.
(only if summer function is switched on)
u In the default setting the creasing protection is enabled.
After the end of the programme, the drum continues
to rotate in short intervals, so that the laundry does not
crease (30 or 60 minutes).
Remove the laundry
u Press the door open button.
l The drum light comes on.
u Remove the laundry.
u Clean the filter (page 53).
u Close the door.
Switch off the machine
u Switch the machine off at the wall.
52

Additional Functions

Alongside the various drying programmes, your dryer
also offers you the opportunity to design your own
programmes.
By selecting one or more additional functions, you can
tailor your drying programme to the specifics of your
laundry.
u You have the opportunity to tailor your dryer to your
needs by changing the basic settings (see page 55).

Easy care

For easy care fabrics made of synthetic or mixed fibres,
and cotton with a non-iron finish.

Start time preselect

By pressing the Start time preselect button one or more
times, the programme start time can be delayed by up to
23,5 hours.
This makes it possible to take advantage of cheaper
night-time electricity, for example. The start time and
consequently also the end time of a programme can be
tailored to your individual lifestyle.
The display shows the start time and anticipated pro-
gramme time end.
The preselected time starts when the start button is
pressed.
When the start time is reached, the selected programme
starts automatically. The current programme duration will
be displayed.
Changing the preset starting time
l In the event of a power cut, the current time is stored.
The duration of the power cut is not taken into account.
The start time can be newly selected.
Note
l The preset starting time can be cancelled by pressing
the quick cycle button.
Gentle dry
The gentle drying button must be pressed for very tempe-
rature sensitive fabrics such as acrylic fibres. The tempera-
ture is reduced and the drying time is extended slightly.
Gentle dry extra
With especially sensible textiles, the key «Gentle Dry
Extra» can be pushed. The temperature is further reduced.

Fast forward

The programme can be shortened or interrupted by pres-
sing the fast forward button. (see changing / interrupting
the programme, page 52).