Whirlpool W5V5LCW Manuel D'utilisation page 31

1 Tab
2 Frame
3 Profile
2. As illustrated in the figures above, press
on the tabs (1) and pull the profile (3) to-
wards yourself simultaneously to re-
move the profile attached to the upper
side of the front door.
1 Innermost glass panel
2 Inner glass panel*
3 Outer glass panel
* It varies depending on the product model. It
may not be available on your product.
3. As illustrated in the figure, raise the in-
nermost glass panel (1) slightly in direc-
tion "A" and pull it out in direction "B"
4. If your product is equipped with an inner
glass panel; Pull the glass holder con-
necting elements in the middle as illus-
trated in the figure to free them from the
glass panels.
4 Glass holder connecting element*
* It varies depending on the product model. It
may not be available on your product.
5. Repeat the same procedure to remove
the inner glass panel (2). The first step
to regroup the door is reinstalling inner
glass panel (2).
6. As illustrated in the figure, place the
glass panel so that it is inserted to the
plastic slot.
Otherwise the glass panel will not
seat completely and may get ex-
posed to vibration and break.
7. When installing the innermost glass
panel (1), make sure that the printed
side of the panel faces towards the in-
ner glass panel.
EN / 31
EN
FR