Changing The Battery - Sony HT-CT60 Mode D'emploi

Changing the battery

The working distance of the remote
shortens as the battery becomes exhausted.
When the remote no longer operates the
unit, replace the battery with a new
CR2025 lithium battery.
1
Push and hold the latch of the
battery holder, then pull out the
battery holder.
Latch
2
Replace the battery with the "+"
facing up, then insert the battery
holder into the slot.
Battery holder
16
US
+ facing up
Notes
• If you do not use the remote for a long period of
time, remove the battery to avoid possible
damage from battery leakage and corrosion.
• Dispose of used battery promptly. Keep the
lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
• Wipe the battery with a dry cloth to assure a
good contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
• Use of batteries other than the CR2025 may
cause a fire or explosion.
CAUTION
Danger of explosion if battery is
incorrectly replaced.
Replace only with the same or
equivalent type.