Publicité
B.4
Video adapter VP 0
HS-Part Number 1007150
Beam splitter 0/30
Lever in position up (104)
70% of the light go to the camera and
30% to the observer
Lever in position down
100% of the light go to the observer
Interface
C-mount
Focal length
f = 60 mm
Installation
• Remove protective cover of the video adapter.
• Remove binocular tube, attach the video adapter (111) in the
beam path and mount again the binocular tube.
• Loosen the fixation screw (107), the knurled ring (106) can
now be twisted around.
• Screw the video camera onto the C-mount interface (105).
• Connect cables (109).
• Rotate the camera until the correct image position is displayed
on the monitor.
• Set fixation screw again (107).
Image focus on the monitor
Needs not to be adjusted, the interface has been designed so
that optimal image focus is set automatically!
Camera cables
Haag-Streit recommends the use of a cable guide (108) (see
accessories) which can be fixed (110) on the headrest.
Thus all camera cables for data transfer and for power can be
stored in an elegant way.
Dimension of object area (in mm)
Magnification
with sensor video camera
microscope
1/2 "
10x
17.3 x 13.0
16x
11.0 x 8.2
25x
6.9 x 5.2
104
105
106
107
108
109
110
111
1/3 "
13.0 x 9.7
8.2 x 6.2
5.2 x 3.9
1500.7200615.04030
© Haag-Streit AG, 3098 Koeniz, Switzerland
9
9
Publicité
Chapitres
