Table Des Matières; Introduction; Product Description; Intended Use - Husqvarna K 7000 Ring Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................4
Assembly...................................................................... 11
Operation...................................................................... 14
Maintenance................................................................. 20

Product description

This Husqvarna K 7000 Ring is a portable handheld cut-
off machine. To operate the product, connect the
product to the necessary power pack.

Intended use

This product is used to cut hard material as masonry
and steel. Do not use the product for other tasks.

Product overview

1. Rear handle
2. Front handle
3. Control for the guide rollers
4. Grease nipples
5. Blade guard
2
Contents
Transportation, storage and disposal........................... 25
Troubleshooting............................................................ 25
Technical data.............................................................. 27
EC Declaration of Conformity....................................... 28
....................................................................................0

Introduction

Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Note: National regulations can limit the operation of the
product.
6. Diamond blade (not supplied)
7. Adjuster screws
8. Screws for the support roller cover
9. Inspection covers
10. Display
1461 - 001 - 17.02.2020