User Maintenance - Andis Ls-4 Manuel D'instructions

YES NO
This appliance conforms to requirements of Low Voltage Directive 2014/35/EU,
EMC Directive 2014/30/EU, Machinery Directive 2006/42/EC. A-weighted sound
pressure level < 70 dB(A). Vibration level < 2.5 m/s
OPERATING INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
Before starting trimmer, remove blade guard (if applicable). Plug cord into
electrical outlet, operate at 120 volt, 60 cycle AC electrical current or as noted on
the unit. To start trimmer, move ON/OFF switch button to ON position, to stop,
move switch button back to original position. After using your Andis trimmer,
rewrap cord loosely and store in a safe place.

USER MAINTENANCE

If appliance is not going to be used for a long period of time, store in a safe, cool,
dry place. The internal mechanism of your motor appliance has been permanently
lubricated by the factory. Other than the recommended maintenance described in
this manual, no other maintenance should be performed, except by Andis
Company, or an Andis authorized service station. To contact Andis directly,
please call our Customer Support Team at 1-800-558-9441 or email us at
info@andisco.com.
A B
OIL
.
2
5