Surface Controls - Jenn-Air 8113P367-60 Guide De L'utilisateur

S
C
URFACE
S C
URFACE ONTROLS
Use to turn on the surface elements. An
infinite choice of heat settings is available
from lo to hi. The knobs can be set on or
between any of the settings.
S
ETTING THE
C
ONTROLS
1. Place pan on surface element.
2. Push in and turn the knob in either
direction to the desired heat setting.
• The control panel is marked to
identify which element the knob
controls. For example,
indicates right front
element.
3. There is an indicator light above each
control knob. When a surface control
knob is turned on, the light will turn on.
The light will turn off when the surface
element is turned off.
4. After cooking, turn knob to OFF.
Remove pan.
D E
UAL LEMENT
The cooking surface is equipped with a dual
element located in the right front position.
To operate, push in on the control knob
and turn to the right to control the large
element, or push in and turn to the left to
control the small element.
OFF
LARGE
ELEMENT
OOKING
BEFORE COOKING
• Always place a pan on the surface unit
before you turn it on. To prevent dam-
age to range, never operate surface
unit without a pan in place.
• NEVER use the cooktop as a storage
area for food or cookware.
DURING COOKING
• Be sure you know which knob controls
which surface unit. Make sure you
turned on the correct surface unit.
• Begin cooking on a higher heat setting
then reduce to a lower setting to com-
plete the operation. Never use a high
heat setting for extended cooking.
• NEVER allow a pan to boil dry. This
could damage the pan and the appli-
ance.
• NEVER touch cooktop until it has
cooled. Expect some parts of the
cooktop, especially around the surface
units, to become warm or hot during
cooking. Use potholders to protect
hands.
S
UGGESTED
The size, type of cookware and cooking
operation will affect the heat setting. For
information on cookware and other fac-
tors affecting heat settings, refer to "Cook-
ing Made Simple" booklet.
hi: Use to bring liquid to a boil. Always
reduce setting to a lower heat when liquids
begin to boil or foods begin to cook.
med. hi: Use to brown meat, heat oil for
deep fat frying or sauteing. Maintain fast boil
for large amounts of liquids.
medium: Use to maintain slow boil for
SMALL
ELEMENT
large amounts of liquids and for most frying
operations.
CAUTION
AFTER COOKING
• Make sure surface unit is turned off.
• Clean up messy spills as soon as pos-
OTHER TIPS
• If cabinet storage is provided directly
• NEVER leave any items, especially plas-
• NEVER allow aluminum foil, meat
H S
EAT ETTINGS
med. lo: Use to continue cooking covered
foods or steam foods.
lo: Use to keep foods warm and melt
chocolate and butter.
4
sible.
above cooking surface, limit it to items
that are infrequently used and can be
safely stored in an area subjected to
heat.
Temperatures may be unsafe for items
such as volatile liquids, cleaners or aero-
sol sprays.
tic items, on the cooktop. The hot air
from the vent may ignite flammable
items, melt or soften plastics, or in-
crease pressure in closed containers
causing them to burst.
probes or any other metal object, other
than a pan on a surface element, to
contact heating elements.
hi
OFF
med. hi
medium
lo
med. lo