Transport And Storage/Safety Measures - BEHA UNITEST ISO-compact Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instruments must be stored in dry and closed areas. In the case
of an instrument being transported in extreme temperatures, a
recovery time of minimum 2 hours is required prior to instrument
operation.
2.0 Safety Measures
Please pay attention to following references.
The respective accident prevention regulations established
by the professional associations for electrical systems and
equipment must be strictly met at all times.
In order to avoid electrical shock, the valid safety and VDE
regulations regarding excessive contact voltages must receive
utmost attention, when working with voltages exceeding 120
V (60 V) DC or 50 V (25 V)rms AC. The values in brackets
are valid for limited ranges (as for example medicine and
agriculture).
Prior to usage, inspect the instrument for external damage.
Prior to any operation, ensure that connecting leads used
and electronic lead are in perfect condition.
If the operator's safety is no longer ensured, the instrument
is to be put out of service and protected against use. The
safety is no longer insured, if the instrument:
– shows obvious damage
– does not carry out the desired measurements
– has been stored for too long under unfavourabele conditions
– has been subjected to mechanical stress during transport.
The instrument may only be used within the operating ranges
as specified in the technical data section.
Z
Avoid any heating up of the instrument by direct sunlight to
ensure perfect functioning and long instrument life.
The opening of the instrument for fuse replacement, for
example, may only be carried out by professionals. Prior to
opening, the instrument has to be switched off and
disconnected from any current circuit.
Appropriate Usage
The instrument may only be used under those conditions and for
those purposes for which it was conceived. For this reason, in
particular the safety referencex, the technical data including
environmental conditions and the usage in dry environments
must be followed.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8966/f

Table des Matières