Month Warranty - BEHA UNITEST ISO-compact Mode D'emploi

Internal load:
Accuracy (20...700 V):
Max. voltage
in masuring circuit:
Insulation meas. range:
Test voltage acc. to
VDE 0413, part 1:
Test current acc. to:
VDE 0413, part 1:
Accuracy:
Max. no-load voltage:
Short circuit current:
Temperature range:
Hight above MSL:
Protection:
Power supply:
Number of measurements: approx. 320
Dimensions:
Weight:

12 month warranty

UNITEST instruments are subject to strict quality control. However,
should the instrument function improperly during normal use,
you are protected by our 12 month warranty (valid only with
invoice or receipt).
Within the warranty period we will decide whether to exchange or
repair the defectiv instrument. We will repair free of charge any
defects in workmanship of materials, provided the instrument is
returned unopened and untampered with.
Damages due to dropping or incorrect handling are not covered
by the warranty. If the instrument breaks down following expiry of
warranty our service department can offer your a quick and
economical repair facility.
Subject to technical change without notice !
approx. 1.3 W for 230 V
AC: 6 (2 % rdg + 5 digits)
DC: 6 (1.5 % rdg + 3 digits)
700 V AC/DC
0 . . . 20 MV / 10 kV resolution
0 . . . 200 MV / 100 kV resolution
500 V DC + 10 % - 0 %
> 1 mA for 500 kV
6 (5 % rdg + 5 digits)
< 600 V DC Max.
approx. 1.1 mA
– 10° . . . + 50° C, for max. 80 % rel.
humidity (Operation)
– 10° . . . + 60° C, for max. 70 % rel.
humidity (Storage)
up to 2000 m
IP 40
9 V battery IEC 6LR61,
Capacity 500 mAh
with Alkaline Battery IEC 6LR61
235 x 75 x 40 mm (L x W x H)
approx. 230 g
19