BEHA UNITEST ISO-compact Mode D'emploi page 11

UNITEST
ISO-compact
Digital Insulation Tester
with Voltgage Tester
Instruction Manual Cat. No. 8966 E
Contents:
1.0 Introduction
2.0 Transport and Storage/Safety Measures
3.0 Control Elements and Connections
4.0 Measurements
4.1 Voltage Measurements
4.2 Phase Test
4.3 Measurement of Insulation Resistance
4.4 Evaluating the Measurement Results
4.5 Battery Test
5.0 Maintenance/Battery Replacement
6.0 Technical Data
Reference marked on instrument or in instruction manual:
Warning of a potential danger, comply with instrument
manual.
Z
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical shock.
Conformity symbol, the instrument complies with the valid
directives. It complies with the EMV Directive (89/336/EEC),
Standards EN 50081-1 and EN 50082-1 are fulfilled.
It also complies with the Low Voltage Directive (73/23/EEC),
Standard EN 61010-1 is fulfilled.
The instruction manual contains information and
references, necessary for safe operation and maintenance
of the instrument.
Prior to using instrument (commissioning / assembly) the user is
kindly requested to thoroughly read the instruction manual and
comply with it in all sections.
Failure to read the instruction manual or to comply with
the warnings and references contained herein can result
in serious bodily injury or instrument damage.
®
®
Page
12
13
14
14
15
15
16
16
17
17
18
11