Instructions For Use; General Description; Preparation - ZUMEX Multifruit Manuel De L'utilisateur

Instructions for use

General description

1 Pusher
2 Cover
Zumex Essential Basic
3 Locking Handle
4 Stainless Steel Tank
5 Anti-drip Tap
6 Peel Bucket

Preparation

Setting up the juice extractor:
Step 1 Remove the packaging and place the juice extractor on a flat surface.
Step 2 Connect the supplied cord to the appliance and plug into a standardised earthed socket.
Fig.1.
Step 3 Place the peel bucket as shown in Fig.2. To keep the peel bucket from getting dirty, you
can line it with a bin bag, leaving the top of the bag hanging over the edges of the container.
Step 4 Check that all parts affected by the safety cut-offs are correctly positioned otherwise
the safety cut-offs will stop the appliance from working.
REMEMBER Given that the diameter of the fruit feeding tube is 75 mm, larger fruits should be cut up
into smaller pieces. When the pieces of fruit are very much smaller than the conduct's diameter, you
may process several together.
22 Instructions for use
Zumex Essential Pro
English
7 Coaster
8 Coaster Inox Trim
Zumex Versatile Pro
9 Grating Disk
10 Filter
11 Filter Driver
12 Filter Driver Nut