Table des Matières
Publicité
INSTALLATION
Take out packaging and clean all the cabinet using
warm water together with 5% of neutral soap then
dry it with a soft-cloth; for the glass parts only use
specific products, avoiding the use of water which
can leave on the glasses limestone residues.
Check that the voltage on the identification plate is
the same as that of the network.
THE ELECTRICAL SUPPLY LINE TO WHICH
THE REFRIGERATOR WILL HAVE TO BE
CONNECTED IS TO BE PROTECTED BY A
VERY SENSITIVE DIFFERENTIAL SWITCH
(Rc=16A,Dc=30mA); IT IS ALSO TO BE LINKED
TO THE GENERAL EARTHING PLANT.
Earthing is necessary and compulsory by law.
Absolutely never use reduction units, patch cords,
adapters or multiple socket outlets to connect the counter. DIRECTLY connect the equipment to
the mains. The manufacturer disclaims all responsability for any damage to people or things due to
incorrect observance of this rule.
Install and position the unit in such a way so as to allow easy access to the power socket.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVIRONMENT
WITH RISK OF FIRE, EXPLOSIONS OR RADIATION. Operation is regular with ambient temperature
indicated on technical data plate.
This equipment must be used exclusively for the preservation, the display and the sale of ice cream
in special bins only.
INFORMATIONS ABOUT USE
Place the counter in horizontal position on
a clean surface, away from sources of heat
(radiators, ovens, etc) icluded sun rays and
away from draughts (for example fans, air
conditioning ducts). It is necessary taht
the condensing unit obtains a good
circulation of air around it. Also the area
around the condensing unit should not be
obstructed by boxes or other objects.
Do not install the unit in open places and
do not expose it to rain.
Never use electrical equipment in the
refrigerated compartment.
Never place containers of liquid on or
immediately above the ticket counter;
should the content spill out, it would
damage the counter.
- 6 -
ENGLISH
Publicité
Table des Matières
