PRO-POINT 8868242 Instructions page 5

VI .O
ELECTRICAL
WARNING! Do not touch
body that is wet or damp. Wet skin reduces
current, increasing
WARNING! To reduce
is connected to a properly
1. Disconnect
adjustments,
storing. Such preventive safety measures
the tool accidentally.
2. Protect yourself against electric shocks when working
equipment.
an increased
3. Do not expose the tool to rain, snow, frost or any other damp or
wet conditions.
electric shock.
4. Do not disconnect
switch. This will prevent an accidental
is plugged
4.1 In the event of a power failure, turn off the machine as soon as
the power is interrupted. The possibility of accidental injury could
occur if the power returns and the unit is not switched off.
5. Do not alter any parts of the tool or accessories.
accessories
compromised
Make certain the power source conforms
6.
equipment
7. This tool is only for use on 120 V (single phase) and is equipped
with a three-prong
with a qualified
outlet is properly grounded.
malfunction
path to carry electricity
7.1 Never remove the grounding
way, as this will render the tool unsafe.
7.2 Do not use any adapter plugs.
WARNING! All wiring
Visit www.princessauto.com
2-in-l Hot Air Soldering
SAFETY
or handle
the danger
risk of electric
grounded
the tool from the power supply before making any
changing accessories,
Avoid body contact with grounded
chance of electrical
Water entering a tool will increase the risk of
the power cord in place of using the power
into the power supply.
are designed
if altered.
(see Specifications).
grounded
electrician
or break down, grounding
away from the user.
should be performed
for more information
Rework Station
a live tool with any part of your
of a serious
shock,
receptacle.
cleaning,
shock if your body is grounded.
start-up when the power cord
with built-in safety features that may be
power supply cord and plug. Check
if you are in doubt as to whether the
If the tool should electronically
provides
prong or modify the plug in any
by a qualified
resistance to electrical
or fatal shock.
be certain that the plug
servicing
reduce the risk of starting
on electrical
surfaces.
All parts and
to requirements
a low resistance
electrician.
8868242
or when
There is
of your
5