Operation; Description; Setting Up - Hach LANGE si627 P Manuel D'utilisateur

4. Operation

4.1. Description

Display
si627 P have an alphanumeric display that explains itself. One of the most significant screens is des-
cribed below as an example:
Measured value.
Measuring unit.
Teclas
4.2. Setting-up
Connect the si627 P to mains. At power up the first time only the following screens will appear:
si627_P
V1.0
IDIOMA >Español
Instrument is already measuring pH, with the following factory settings::
• Current output: 4 mA = pH 0, 20 mA = pH 14.
To modify this configuration see pages 13 and 14.
si627 P_HACH_LANGE_Ed.0510.indd ANG:11 si627 P_HACH_LANGE_Ed.0510.indd ANG:11
MEASURE
pH 7.34
ENTER.
• Horizontal movements to move forward in the "diagram".
• Acceptance of numerical values.
ESCAPE.
• Horizontal movements to move back in the "diagram".
• Vertical movements to move back in the "diagram".
• To erase numerical values.
• Modification of numerical values.
• Cursor ">" movements on the screen.
Possibility to select other language
with keys.
MEASURE
Italiano
Français
Attention. Possibility to
English
change to mV with
Deutsch
Português
25.2 °C
: >pH
mV MEASURE pH & °C
key.
Sample temperature
Resolution:
1 °C manual selection.
0.1°C measuring with Pt1000.
M E A S U R E
PH 7.34 25.2 °C
11
20/5/10 10:50:45 20/5/10 10:50:45