Installation; Si627 P; Assembly - Hach LANGE si627 P Manuel D'utilisateur

3. Installation

3.1. si627 P

DANGER
Only qualified personnel should conduct the tasks described in this section of the manual.

3.1.1. Assembly

For the si627 P mounting a drill hole is required according to the diagram.
After putting the instrument in the panel, it must be fitted using two clamps as indicated in the figure.
BNC connector
for electrode
si627 P_HACH_LANGE_Ed.0510.indd ANG:7 si627 P_HACH_LANGE_Ed.0510.indd ANG:7
21 mm
0.8 in
Plug-in screw connector
92 mm
3.7 in
Drill hole
Panel
80 mm
3.1 in
Side view
Clamp to fix to the panel
7 mm
0.3 in
7
20/5/10 10:50:44 20/5/10 10:50:44