Machine Overview; For Your Safety; Clothing And Equipment - Viking AHK 701 Manuel D'utilisation

Notes on the instruction manual:
The camera symbol serves to link
the figures on the illustration pages
with the corresponding text
passages in the instruction manual.
The figures can be found at the front of the
instruction manual.
This instruction manual constitutes
original manufacturer's instructions in
the sense of EC Directive 2006/42/EC.
VIKING is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.
0478 906 9905 A - EN

1. Machine overview

AHK 701 – Adjustable ridger
1 Adjustable ridger wings
2 Ridger tip
3 Bracket
4 Pin
5 Cotter pin
6 Adapter
7 Folding retainer
AHK 702 – Fixed ridger
8 Ridger wing
9 Ridger tip
10 Bracket
11 Tommy screw
12 Pin
13 Cotter pin
14 Adapter
15 Folding retainer

2. For your safety

2.1 General
These safety regulations must
be observed when working with
the machine.
Read the entire instruction
manual before using the
machine for the first time. Keep
the instruction manual in a safe
place for future reference.
Printed on chlorine-free bleached paper. Paper is recyclable. Cover is halogen free.
Please also observe the instruction
manual for the tiller – particularly the safety
instructions in the "For your safety"
section.
The safety instructions contained in this
1
instruction manual supplement the safety
instructions in the instruction manual for
the tiller.
Caution – risk of injury!
The ridger is intended for cutting furrows in
the soil; its use for other purposes is not
permitted.
The ridger must only be installed on
VIKING devices intended for this purpose.
Information is available from your VIKING
specialist dealer.
Modifications or adaptations to the ridger
are not permitted.
Any modifications to the ridger will
furthermore result in voiding of the
warranty cover.
Risk of injury when lifting the tiller!
Installing a ridger increases the overall
weight of the tiller and changes its centre
of gravity.

2.2 Clothing and equipment

Always wear thick gloves when
assembling, installing and
removing the ridger as well as
when working on the
adjustment elements.
2.3 Transport
Before transporting the tiller (e.g. pushing,
pulling, lifting), always remove the ridger
and transport separately.
11