Specifications - LD Systems VIBZ 10 Manuel D'utilisation

31
DC ADAPTOR IN
Screwable low-voltage socket for the power supply of the mixer. Please use only the supplied AC power supply to avoid damage to the
mixer. Turn on the mixer only after connecting the power supply to the mains and the low-voltage socket. The mains voltage of your power
supplier and the operating voltage of the device must be the same!
32
POWER ON / OFF
On / Off switch for the power supply of the device.
33
POWER LED
The power LED lights up once the system is properly connected to the power mains and is switched on.
Note: A mounting point for the optional microphone stand adapter LDVIBZMSADAPTOR is located on the underside of the device.
LDVIBZMSADAPTOR

SPECIFICATIONS

Model Name:
Product Type:
Type:
Number of Channels:
Mono Channels:
Mono Mic/Line Input Channels:
Mono Mic/Line Input Connections:
Mono Mic Input Type:
Frequency Response Mono Mic Input:
Amplification Range Mono Mic Input:
Channel Crosstalk:
THD Mono Mic Input:
Impedance Mono Mic Input:
S/N Ratio Mono Mic Input:
Mono Line Input Type:
Amplification Range Mono Line Input:
THD Mono Line Input:
Impedance Mono Line Input:
S/N Ratio Mono Line Input:
Mono Channel Equalizer Treble:
Mono Channel Equalizer Mids:
Mono Channel Equalizer Bass:
Channel Insert:
Channel Insert Connections:
LDVIBZ10C
analogue mixer
live / home recording
10
4
6.3 mm stereo jack, XLR
electronically balanced, discreet design
10 - 45,000 Hz
50 dB
90 dB
0.0058%
4 kOhm
113 dB
electronically balanced, discreet design
50 dB
0.0045%
21 kOhm
116 dB
+/-15 dB @ 12 kHz
+/-15 dB @ 2.5 kHz
+/-15 dB @ 80 Hz
channel 1 & 2
6.3 mm stereo jack (TIP= send / RING= return)
9