KitchenAid KRFC704F Guide De Dimensions

PRODUCT DIMENSIONS
H
G
F
E
B
Model Number
Model Size
Description
A Overall Height
B Height to top of cabinet
C Depth with doors open 90°
D Depth with drawer open
E Depth with handles
F Depth without handles
G Depth of cabinet only
H Width of cabinet
I Width with door open 90°
Because Whirlpool Corporation policy includes a continuous commitment
to improve our products, we reserve the right to change materials and
specifications without notice.
W11375811B
French Door Bottom Mount Refrigerator with Ice
Dispenser
I
90˚ 90˚
A
KRFC704F, KRFC604F
23.8 cu ft (674.04 L)
Dimensions
71 / " (182.6 cm)
7
8
70 / " (180.0 cm)
7
8
433/4" (111.1 cm)
45 / " (116.5 cm)
7
8
311/2" (80.0 cm)
28 7 / " (73.3 cm)
8
24 / " (61.9 cm)
3
8
35 / " (90.5 cm)
5
8
43 / " (110.8 cm)
5
8
(KRFC704F, KRFC604F)
Electrical Requirements
C
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
D
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Electrical: A 115 V, 60 Hz AC only, 15 A or 20 A fused, grounded electrical
supply is required. It is recommended that a separate circuit serving only your
freezer be provided. Use an outlet that cannot be turned off by a switch. Do not
use an extension cord.
Water: A cold water supply with water pressure between 35 psi and 120 psi
(241 kPa and 827 kPa) is required to operate the water dispenser and ice
maker. If you have questions about your water pressure, call a licensed,
qualified plumber.
NOTE: If the water pressure is less than what is required, the flow of water
from the water dispenser could decrease or ice cubes could be hollow or
irregularly shaped.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a reverse
osmosis system going to the water inlet valve of the refrigerator needs to be
between 35 psi and 120 psi (241 kPa and 827 kPa).
If a reverse osmosis water filtration system is connected to your home cold
water supply, the water pressure to the reverse osmosis system needs to be a
minimum of 40 psi to 60 psi (276 kPa to 414 kPa).
Dimensions are for planning purposes only. For complete details, see
Installation Instructions packed with product. Specifications subject to
change without notice.
WARNING
Electrical Shock Hazard