Before First Use; Flushing The Appliance - Philips HD7448/10 Mode D'emploi

•
Children should be supervised to ensure that
they do not play with the appliance.
•
Keep the mains cord out of the reach of
children. Do not let the mains cord hang over
the edge of the table or worktop on which
the appliance stands.
3.0.3 Caution
•
Do not place the appliance on a hot surface
and do not let the mains cord come into
contact with hot surfaces.
• Unplug the appliance before you clean it and
if problems occur during brewing.
• This appliance is intended to be used in
household and similar applications such as:
• staff kitchen areas in shops, offices and
other working environments;
•
farm houses;
•
by clients in hotels, motels and other
residential type environments;
•
bed and breakfast type environments.
3.1 Electromagnetic fields
(EMF)
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.
6
4222_001_9932_4_DFU-Redesign_A5_v2.indd 6
4 Before first use
Clean the jug and the filter holder (see
1
chapter 'Cleaning').
Put the appliance on a flat and stable surface.
2
Put the plug in an earthed wall socket.
3
To store excess cord, push it into the opening
4
at the back of the coffee maker (Fig. 2).
Warning:
B
Make sure that the cord does not come into
contact with hot surfaces.

4.1 Flushing the appliance

Open the lid (Fig. 3).
1
Fill the water tank with fresh cold water up
2
to the MAX indication (Fig. 4).
Close the lid.
3
Put the jug on the hotplate.
4
Do not put a filter and ground coffee in the
filter holder.
Press the on/off switch to switch on the
5
appliance. (Fig. 5)
• HD7448: The power-on light goes on.
Let the appliance operate until all water has
6
run into the jug.
Press the on/off switch to switch off the
7
appliance. Let the appliance cool down for at
least 3 minutes before you start to brew coffee.
6/22/12 3:41 PM