Electromagnetic Fields (Emf); Before First Use; Setting The Clock - Philips HD7769 Mode D'emploi

English
8
Caution
- Do not place the appliance on a hot surface and prevent the
mains cord from coming into contact with hot surfaces.
- Do not place the coffeemaker in a cabinet when in use.
- Unplug the appliance if problems occur during grinding or
brewing and before you clean it.
- Keep the plug and the wall socket dry.
- Do not lift and move the appliance while it is operating.
- The jug is hot during and after brewing. Always hold the jug by its
handle.
- Never use the jug in a microwave oven.
- Wait until the appliance has cooled down before you store it. The
hotplate and the coffee jug may be hot.
- After you have unpacked the appliance, make sure it is complete
and undamaged. If in doubt, do not use the appliance but contact
the Consumer Care Center in your country.
- This machine is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops,
offices, farms or other work environments.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.

Before first use

Setting the clock

1 Put the mains plug in the wall socket. The time indication flashes on the display to indicate that
you have to set the clock time.
2 Turn the control knob to set the hour. The hour indication flashes (Fig. 2).
3 Press the center of the control knob to confirm the hour (Fig. 3).
4 The minutes indication starts flashing to indicate that you have to set the minutes (Fig. 4).
5 Turn the control knob to set the minutes (Fig. 5).
6 Press the center of the control knob to confirm the minutes (Fig. 6).
7 The display shows the set clock time. The coffeemaker is now ready for use.