Zehnder ComfoControl Luxe Manuel De L'utilisateur page 35

Filter warning on the CC
Luxe
If the ventilation unit's filters require
replacement, then the "FILTERS - RE-
PLACE FILTERS" warning appears on
the CC Luxe display.
To replace (or clean) any filters,
please refer to your ventilation sys-
tem's user manual.
The filter warning can be reset as fol-
lows:
1. Press " " to go to "system sta-
tus".
Check: Filter
2. Press "
"FILTERS - REPLACE FILTERS"
warning.
System status
System status
2
Filter E2
Reset
Status information on the CC Luxe
In the absence of error message, you
will see:
• "CHECK: OK" on the screen of
the CC Luxe.
Information on the status of your ven-
tilation and/or cooling system can
then be accessed. To that end, follow
these steps:
1. Press " " to go to "system sta-
tus".
Wednesday
Cooker hood
Settings
1
GHE
" to delete the
Check: OK
The "SYSTEM STATUS" screen dis-
plays all the system data on the CC
Luxe.
System status
Inside temperature
Outside temperature
Bypass
GHE
Heater
ComfoCool
Filter remain
Comfo Control
Controller HR
2. Press " " to return to the main
screen.
What to do in the event of a
malfunction
When an malfunction occurs, please
contact the fitter.
• Make a note of your ventilation
system type.
• Make a note of any malfunction
codes on the CC Luxe display.
The system should remain connected
to its power supply unless the ventila-
tion unit requires taking out of service
due to a serious malfunction or for fil-
ter cleaning/replacement or any other
compelling reasons.
When the unit is unplugged, the dwell-
ing will no longer benefit from me-
chanical ventilation, and this can lead
to problems with damp and mould.
Long-term deactivation of the ventila-
tion unit must therefore be prevented.
Wednesday
Cooker hood
Settings
1
GHE
2
21ºc
15ºc
losed
Open
Not installed
Not installed
3 wks
Rev. 3.007B1.007
Rev. 0.000
13 EN