Use Of The Comfocontrol Luxe - Zehnder ComfoControl Luxe Manuel De L'utilisateur

2. Use of the ComfoControl Luxe

The overview below summarizes the information that will be displayed on the CC Luxe.
If the function is not
surrounded by a ,
then it is not active
Current outside temperature
Current indoor temperature
and button for setting the
comfort temperature and
ComfoCool control.
Actual ventilation setting
(programmable
using MAN function)
Automatic (=AUTO)
or manual (=MAN)
ventilation activated
The CC Luxe display is a touch screen. All settings can be accessed, adjusted and confirmed
simply by touching the screen.
If a feature or device is not regis-
tered, the corresponding buttons
and/or symbols will not be shown.
While the open fire programme is
activated, or when an ComfoCool is
registered, the supply and exhaust
fan cannot be manually switched
off.
If the CC Luxe is not operated for 30
seconds, it automatically returns to
the main screen. Your settings will
be saved.
The minimum and maximum time
delay for the (ventilation) settings
are preset in the software.
The CC Luxe is used for the following:
- Setting the language;
- Setting the screen;
- Setting the day and time;
EN 2
ComfoCool (=
OPEN (= )
afterheater (=
or CLOSE (= )
and/or ComfoHood (=
the air supply
Check:
System status
and error messages
Heat Recovery
system registered
)
OPEN (=
)
or CLOSE
)
the air exhaust
activated
Cooker hood
Settings
A
GHE
Valve Heat
Recovery open
External 0-10V
analog control active
or bypass CLOSED [=
- Setting temperatures to be
displayed.
- Reading and setting the
ventilation volume;
- Switching the supply and
exhaust fan on/off;
- Setting the comfort temperature;
- Switching the ComfoCool on/off
(optional);
- Switching the ComfoHood on/off
(optional);
- Setting a time delay for a number
of ventilation settings;
- Setting a temperature correction;
- Setting a personal
ventilation programme;
- Setting a personal
temperature programme;
- Setting the P menus
(only by the fitter).
A concise explanation of the above
listing is given in the paragraphs be-
low.
) If the function is not
(= ) surrounded by a
then it is not active
Wednesday
Switch ComfoHood
or OFF (=light)
To screens where
other settings can be made
Switch automatic or manual
ventilation ON (=dark)
or OFF (=light)
Go to SYSTEM STATUS
screen (for system data
and error messages)
Bypass
[= ]
OPEN
]
,
Time and date
ON (=dark)