Switching Supply And Exhaust Fan On/Off - Zehnder ComfoControl Luxe Manuel De L'utilisateur

At level , the house is ventilated
using the minimum prescribed ven-
tilation volume.
• Level 1 g Low.
- Use in the event of
low ventilation need.
• Level 2 g Normal.
- Use in the event of
normal
ventilation need.
• Setting 3 g High.
- Use this position
during cooking,
showering and when
additional ventilation
is needed.
• Setting 3 g Temporarily High.
- Use this posi-
tion during cook-
ing, showering
and when extra
ventilation is briefly
required.
The ventilation unit will switch to
the highest ventilation position set
in the house unless overruled by an
automated software programme.
The different ventilation settings can
be manually set as follows:
1. Press the current ventilation set-
ting.
- A new settings screen will
now appear on top of the
main screen.
2. Set the preferred ventilation setting
using ' ' and ' '.
3. Press ' ' to return to the main
screen.
- The selected ventilation setting
will appear in the small house on
the CC Luxe.
1
Check:
Manual ventilation
During manual ventilation, the CC
Luxe will not display "AUTO" but
"MAN", and the Auto button will ap-
pear light.
4. Press "Auto" to return to auto-
matic ventilation.
Temporary high setting
Once the programmed time delay is
complete, the ventilation unit auto-
matically switches back to the former
ventilation setting. The time delay can
be deactivated earlier by selecting a
new ventilation setting.
2.6. Switching supply and
exhaust fan on/off
Bear in mind that switching off the
supply or exhaust fan will tempo-
rarily imbalance your dwelling's
ventilation system.
As soon as the supply and/or ex-
haust fan is switched on or off
manually, the CC Luxe will auto-
matically switch to manual modes.
The supply and/or exhaust fan can
be switched on/off manually only
when shown in brackets.
The supply and exhaust fan can be
switched off as follows:
• Press ' ' to switch off the
supply fan.
- A ' ' will now appear instead
of the arrow.
Wednesday
3
Vent
2
GHE
5 EN