REBER Professional 30 Eco Notice D'utilisation Et Entretien page 9

Included:
3 20 Bags cm. 20x30 + Canister attachment
Legend
1. Start cycle switch
2. Seal Switch
3. Vacuometer
4. Cover
5. Vacuum Chamber Gasket
6. Vacuum chamber
CONSTRUCTION RULES
Vacuum machines we build have been designed and manufactured in accordance with the machine directive 2006/42 CEE in conformity with the
requirements requested by legislation at the manufactured date. The references are:
2004/108 ( ex 89/336) – 92/31 – 2006/95 ( ex73/23) – 89/392 - 98/37-2002/95-2011/65/UE – 2009/125/UE
Furthermore the Product rules has been taken into consideration:
IEC 60335-2-45:2002 (3° ed.) + A1:2008 in con. With IEC 60335.1:2001 (4° ed.) (incl. Corr. 1:2002) + A1:2004 + A2:2006 ( incl. Corr. 1:2006) -
EN 55014-1 :2006 + A1 :2009 – EN 55014-2 :1997 +A1:2009 + A2:2008 – EN61000-3-2:2006 + A1:2009+A2:2009 – EN61000-3-3:2008 – 61000-
4-2:1995 + A1:1998 + A2:2001 – EN61000-4-4:2001- EN61000-4-5:2006 – EN61000-4-6:2007 – EN61000-4-11:2004 – EN 62233:2008 –
EN60204-1:2006
IMPORTANCE OF THE HANDBOOK
The handbook is integral part of the machine. It includes important information regarding safety and warnings pointed with those symbols
The information included, will allow you to use the machine in perfect safety conditions and to preserve performances
WARRANTY
The suppplier restricts hisself to repare or replace all components should have constructions faults in the first 12 months from the date of installation
and however not later than 18 months from the shipment date. Components subjected to normal consumption such as Welding bar gasket, Welding
bar resistence, Welding bar cover or Vacuum Chamber Gasket are excluded from warranty. The costumer must indicate to the supplier, in order du
benefit from the warranty, the faults pointing out, the serial number of the machine, the purchase date (from invoice), and furthermore he will have to
send the faulty part at his charges for reparation or replacement. The supplier filfils completely his warranty obligations by the reparation or
replacement of the faulty piece. If reparation is requested ehere the machine is installed, all charges regarding, labour, trip and hotel fees of the
technicians will be entirely at the purchaser charges. The damage due to an inappropriate use, missed maintenance, tampering are not included in the
warranty.
WARNING AND RULES
Read carefully all instructions before using the machine, taking particular care of the paragraphs with the safety and danger symbols.
Remove the plug before all maintenance and cleaning operations
WARNING FOR USE
The manufacturer declines all responsability in case of improper use of the machine
- Check the power cord periodically, if damaged replace it with a power cord same as the one fournished; replacement must be done by
qualified technician.
- Do not immerse the machine in water or other liquids for cleaning
- Do not remove the plug from the socket gripping the power cord
- Do not use extension cables
- Do not use the machine with wet hands or bare feet
- Disconnect the plug from the soket before cleaning or maintenance
TRANSPORTO – HANDLING – STORAGE
The machine is pace in a cardboard box with protection plugs.
The package is proper to travel by all means of transport.
It can be put a carton on another carton for a maximum of 5 cartons
The package must be stored in a dry and no dust place.
When on pallets, handle by transpallet or electric lifter.
UNPACKING
Open the cardboard box, take off the machine and place on a plane support.
DIRECTIVE 2002/96/CEE
At the end of his working life the product must not be disposed as urban waste. It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
7. Welding bar
8. Air outlet
9. Potentiometer
10. Welding bar gasket
11.
12. Led ( 2 on 9709 NE)