Hardware
Installation
ttach the front grille to the cabinet by Insertingthe
tabs on the grille into the tabs on the front of the
cabinet Pushthe grille in until it snaps into place
(See Fig 10)
ift the inlet grille and secure it with a screw (Type A)
hroughthe front grille.(See Fig. 10)
Window
Installation
completed See ELECTRICAL DATA for attaching
power cord to electrical outlet.
Electrical
Data
Line Cord Plug
Do not under any
circumstances
or remove
grounding prong
from the plug
Power supply cord with
3-prong grounding plug
Use of extension
• Becauseof potentialsafety hazards, we strongly discouragethe use of an extension cord. However,if you wish
to use an extensioncord, use a CSA certified/UL-listeda-wire (grounding)extensioncord, rated at 15A, 125V.
Electrical Data (Fpr some models)
Line Cord Plug
O
All wirring shouldbe made in accordancewth local electricalcodes and regulations
Aluminum house wiring may pose special problems. Consult a qualified electrician.
24
Room
Air Conditioner
of room
air conditioner
cut
the
Standard 125V, 3-wire grounding
receptacle
cords
Use Wall Receptacle
is now
Use Wall Receptacle
1
rated 15A, 125V AC
230V/208V
tandem type
Fig. 10
Power Supply
Use 15 AMP, time
delay fuse or circuit
breaker.
Power Supply
Use
15 AMP
circuit.
Refer to nameplate for
correct fusing.