LG GoldStar R1201E Manuel D'utilisation page 14

Hardware Installation
WK Series
How to Instal/
To prevent vibration and noise, makesure the unit
is installed securely and firmly.
Installthe unit where the sunlight does not shine
directly on the unlt.
The outside of the cabinet
at least 12" and there should be no obstacles, such
as a fence or wall, within 20" from the back of the
cabinet because it will prevent heat radiation of the
condenser.
Restricton of outside air will greatly reducethe
cooling efficiencyof the air conditioner.
A CAUTION
: All side louvers of the cabinet
nstallthe unit a little slanted so the back is slightly lower than the front (about 1/2),
This will force condensed
Install the unit with the bottom
Window Requirements
All supporting parts should be securedto firm wood,
masonry, or metal
• This unit is designedfor installation in standard double
hung windows with actual openingwidths from 23"
to 36"
• The top and bottom window sash must open sufficiently
to allow a clear vertical opening of 15" from the bottom
of the upper sash to the window stool.
14 Room Air Conditioner
the Unit
must extend outward
must remain
water to flow to the outside.
about 30"æ60" above
Cooled air
for
exposed to the outside
the floor level.
23" to 36"
15" min
(With frame curtain)
Interior wall
20 1/12" min.
(Without frame curtan)
Fence
Awning
Heat
radiation
About 1/2"
Over 20"
of the structure.
Stool
Offset
1/2" to 11/4"
Sill
Exterior