Safety Features - Ayce PTH1103T Mode D'emploi

Colonne céramique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Timer function:
The timer function allows you to set the length of operation from 1 hour to 8 hours.
Keep pressing timer button to increase hours.
Once the timer has been set, the timer will count down the hours in 1 hour increments,
showing on the display the remaining operating time, until the heater turns itself off.
Pressing Timer setting button once more after the display reflects 8 hours will reset
the heater to continuously running.
REMARK: when timer is setting, LED display will be closed in 30 seconds.
NOTE: it is normal for heater to cycle ON and OFF as it maintains the set temperature.

SAFETY FEATURES

Tip over switch:
1.
To be safe, there is a tip over switch under the bottom of heater. When the
appliance is placed upright, it will automatically start working again.
When the heater is in "AUTO" mode and it tips over for more than 3 seconds,
it will not reboot unless it is unplugged and re-opened. It also may lose all
memory of its settings.
Thermal overload protector:
2.
A thermal overload protector is built in to prevent overheating.
3.
When an overheat temperature is reached, the heater will be automatically shut
off. It can only resume operation when the user resets the unit.
Ripristino del termoventilatore:
1.
Unplug the heater and wait 10 minutes for the unit to cool down. Inspect it and
remove any objects on or adjacent to the heater that may cause overheating.
2.
After the 10 minutes, plug the unit in again and operate normally.
3.
If the appliance can't operate normally, remove the plug immediately from the
socket and have the heater serviced by an appointed service only.
MAINTENANCE
WARNING: Always unplug the cord before moving or servicing.
CLEANING: Important! Do not immerse the heater in water! Do not try to disassemble
the heater. Do not remove grill.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will
damage the heater. Never use alcohol or solvents.
STORAGE: Store the heater with these instructions in the original carton in a cool,
dry place.
WARNING: The main power switch and the on/off switch should not be used as the
sole means of disconnecting power. Always unplug the power cord before servicing or
moving the unit.
WARNING: To avoid the danger of electric shock, unplug from the outlet when not in
use and before cleaning. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid a
hazard.
DISPOSAL
The appliance, accessories and packaging are all to be disposed of in
an ecological manner. Electronics that are no longer serviceable, can
be brought to stores for recycling. Do not throw electronic devices
into the household waste. According to the EU guideline 2002/96/EG
pertaining to electronic devices, all unserviceable appliances must be
disposed of bundled and in an ecological manner.
40 | 41
GB

Publicité

Table des Matières
loading

Table des Matières