Anatomical Seat; Anatomical Back; Adjust The Brakes - Vermeiren Eclips XXL Mode D'emploi

3.3

Anatomical seat

L L L L
WARNING:
Risk of injury – Check that the seat is firmly secured before use.
Check that the screws are not damaged.
L L L L
WARNING:
Risk of injury – Avoid getting your fingers caught during the
assembly process (between seat and cross-hinge).
3.4

Anatomical back

L L L L
WARNING:
Risk of injury – Check that the backrest is firmly mounted into the
four brackets before using your wheelchair.
L L L L
WARNING:
Risk of injury – Avoid getting your fingers, clothes caught during the
assembly process.
3.5

Adjust the brakes

L L L L
WARNING:
Risk of injury – Brakes may only be adjusted by your specialist
dealer.
Adjust the brakes according following rules:
Your wheelchair has an anatomical padded seat, place it
on the tubular cross-hinge so that the seat's supports
engage equally with the cross-hinge. In the wooden base
you will find slots that are placed in the hinge's cross-
pieces. To fold up the wheelchair, remove the seat by
pulling it upwards.
The backrest of the wheelchair can be mounted
by following instructions.
1. Mount the backrest into the four brackets
.
2. Turn on the upper star buttons
star buttons by hand.
3. Check that the backrest is firmly fixated.
To remove the backrest of the wheelchair:
1. Loosen the upper star buttons ➁.
2. Pull the backrest upwards out the four
brackets .
1. Disconnect the brakes by pulling lever
backwards.
Page 14
Eclips XXL
2013-04
to lock the