Replacing The Battery - DS VieGlobal 001-1100-01 Mode D'emploi

24
Setting the start time (Fig. D2)
7. Press the SET button repeatedly until the desired hour is set.
8. Press the button to switch to minutes. The minute display fl ashes.
9. Press the SET button repeatedly until the desired minutes are set.
10. Briefl y press the
starting time is set.
You are now in the setting mode for the timer end time. The hour display fl ashes and
in addition the OFF (15) symbol is illuminated.
Setting the end time (Fig. D3)
11. Press the SET button repeatedly until the desired hour is set.
12. Press the button to switch to minutes. The minute display fl ashes.
13. Press the SET button repeatedly until the desired minutes are set.
14. Briefl y press the
You are now in the setting mode for the fan speed level. The display shows "FAN" and
the symbol
Setting the fan speed (Fig. D4)
15. Press the SET button several times to switch between the diff erent speed levels.
The levels can be set in the following order: High speed
mode
16. Briefl y press the
(current time). The timer is set and activated.
Please Note: To deactivate the timer, the starting and end time have to be identical. For
this purpose you have to go through the individual steps of the timer setting again.
The settings remain stored until they are changed.

Replacing the Battery

PLEASE NOTE!
■ Use only the battery type specifi ed in the technical data. Otherwise there is a danger
of explosion.
■ The battery must not be charged or reactivated in any way, disassembled, thrown into
a fi re, immersed in liquids or short-circuited. Also protect the battery from heat and
sunshine. There is a risk of explosion!
■ The battery contains chemical substances. The battery should therefore always be
disposed of properly.
■ Take the battery out of the device if it is dead or if you will not be using the device for
a prolonged period. This will prevent any damage caused by leaks.
■ Do not use the device if the battery has leaked. Remove the leaking battery from the
battery compartment immediately.
08362_DE-EN-FR-NL_A5_V2.indb 24 08362_DE-EN-FR-NL_A5_V2.indb 24
button to switch to the next display. The ON symbol goes off . The
button to switch to the next display. The end time is now set.
(17) fl ashes.
button to exit the setting mode and switch to the standard display
– Low speed – Night
31.07.2020 14:34:51 31.07.2020 14:34:51