Description Of The Device - DS VieGlobal 001-1100-01 Mode D'emploi

20
NOTICE – Risk of Damage to Material and Property
■ Do not tilt the device if there is thermal brine in the tank.
■ Switch off the device and pull the mains plug out of the socket if an error occurs dur-
ing operation, when there is a power cut or before a thunderstorm.
■ Do not use the device if it has malfunctioned, fallen or been dropped into water. Have
it checked in a specialist workshop before using it again.
■ The device must be switched off when inserting or removing the mains plug.
■ Never pull or carry the device by the connecting cable. When you pull the mains plug
out of the socket, always pull on the mains plug and never the mains cable!
■ Protect the device from other heat sources, naked fl ames, sub-zero temperatures
and impacts. Also protect the main unit from moisture and wet conditions.
■ Use only original accessories from the manufacturer in order to guarantee that there
is no interference that may prevent the device from working and to avoid possible
damage.
■ Do not place or lay any heavy objects on the device or the connecting cable.

Description of the Device

The evaporator is a device that essentially consists of a container for the liquid to be
evaporated and an electronically controlled fan. The fan creates a draft which moves
over the liquid to be evaporated and releases the evaporating substances into the sur-
rounding ambient air.
The evaporator can be used up to 24 hours a day. The device is suitable for extended
use.
During the evaporation of the thermal brine, crystal deposits can form on the
tank (8). These are normal and do not represent a defect. Crystal formation
also depends on the humidity and temperature of the room in which the device
is used.
08362_DE-EN-FR-NL_A5_V2.indb 20 08362_DE-EN-FR-NL_A5_V2.indb 20 31.07.2020 14:34:50 31.07.2020 14:34:50