Auto Off Timer - Mitsubishi Electric CITY MULTI PKFY-NBMU-E2 Manuel D'utilisation

6. Timer
7. After completing steps 3 to 6 above, press the Filter
in the value.
Note:
Your new settings will be cancelled if you press the Operation mode
(Back) button 2 before pressing the Filter
8. Press the Operation mode (Back) button 2 to return to the standard
control screen.
9. Press the Timer On/Off button 9 to start the timer countdown. When the
timer is running, the timer value is visible on the display. Be sure that
the timer value is visible and appropriate.
<Viewing the Current Simple Timer Settings>
T M I E R
1. Be sure that the simple timer indicator is visible on the screen (at 1).
2. Press the Timer Menu button 2, so that the "Monitor" appears on the
screen (at 5).
• If the ON or OFF simple timer is running, the current timer value will
appear at 6.
• If ON and OFF values have both been set, the 2 values appear alter-
nately.
3. Press the Operation mode (Back) button 2 to close the monitor display
and return to the standard control screen.
<To Turn Off the Simple Timer...>
Press the Timer On/Off button 9 so that the timer setting no longer appears
on the screen (at 7).
˚F
<To Turn On the Simple Timer...>
Press the Timer On/Off button 9 so that the timer setting becomes visible at 7.
˚F
Examples
If ON and OFF times have both been set at the simple timer, operation and
display are as indicated below.
Example 1:
Start the timer with ON time set earlier than OFF time
ON Setting : 3 hours
OFF Setting : 7 hours
Hr ON
AFTER
SIMPLE
Hr
AFTER OFF
˚F
˚F
SIMPLE
SIMPLE
10
button 4 to lock
button 4.
Timer Setting
Hr O N
AFTER OFF
SIMPLE
˚F
SIMPLE
Hr ON
AFTER
˚F
SIMPLE
At Timer Start
Display shows the timer's ON setting (hours
remaining to ON).
At 3 hours after timer start
Display changes to show the timer's OFF setting
(hours remaining to OFF).
The time displayed is OFF setting (7 hours) – ON
setting (3 hours) = 4 hours.
At 7 hours after timer start
The air conditioner goes off and will remain off
until it is restarted.
Example 2:
Start the timer with OFF time set earlier than ON time
ON Setting : 5 hours
OFF Setting: 2 hours
Hr
AFTER OFF
˚F
˚F
SIMPLE
Hr ON
AFTER
SIMPLE
˚F
˚F
SIMPLE

6.1.3. Auto Off Timer

This timer begins countdown when the air conditioner starts and shuts
the air conditioner off when the set time has elapsed.
Available settings run from 30 minutes to 4 hours in 30-minute intervals.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the
same time.
*2. The Auto Off timer will not operate when any of the following condi-
tions is in effect.
The timer is off; the system is in malfunction state; a test run is
in progress; the remote controller is undergoing self-check or
remote controller check; the user is in the process of selecting a
function; the user is in the process of setting the timer; the system
is under central control. (Under these conditions, On/Off operation
is prohibited.)
AFTER
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
CLOCK
PAR-21MAA
<How to Set the Auto Off Timer>
1. Be sure that you are at a standard control screen, and that the Auto Off
timer indicator is visible in the display (at 1).
When something other than the Auto Off Timer is displayed, set it to
AUTO OFF TIMER using the function selection of remote controller (see
8.[4]–3 (3)) timer function setting.
2. Hold down the Timer Menu button 2 for 3 seconds so that the "Set Up"
appears on the screen (at 2).
(Note that each press of the button toggles the display between "Set Up"
and "Monitor".)
3. Press the appropriate Set Time button 1 as necessary to set the OFF
time (at 3).
4. Press the Filter button 4 to lock in the setting.
Note:
Your entry will be cancelled if you press the Operation mode (Back)
button 2 before pressing the Filter
5. Press the Operation mode (Back) button 2 to complete the setting
procedure and return to the standard control screen.
6. If the air conditioner is already running, the timer starts countdown im-
mediately. Be sure to check that the timer setting appears correctly
on the display.
At Timer Start
Display shows the timer's OFF setting (hours
remaining to OFF).
At 3 hours after timer start
Display changes to show the timer's ON setting (hours
remaining to ON).
The time displayed is ON setting (5 hours) – OFF
setting (2 hours) = 3 hours.
At 5 hours after timer start
The air conditioner comes on and will continue to run
until it is turned off.
OFF
AUTO OFF
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
Timer Setting
AFTER OFF
AUTO OFF
button 4.