Timer Operation - Sharp AH-XP18UHD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TIMER OPERATION

TIMER OFF
1
Press the TIMER OFF button and
set the time as desired.
• The orange TIMER lamp (
up.
• The timer setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
off.
NOTE:
• Timer duration can be set from a minimum half an hour to a maximum of 12 hours. Up to 9.5 hours,
you can set in half-hour increments, and from 10 to 12 hours, in 1-hour increments.
• The TIMER OFF and TIMER ON can not be set together.
• When the temperature is set during timer setting, the temperature will show in the display for 5 sec-
onds and then return to the timer display.
• If a power failure occurs while the TIMER is set, the TIMER setting will be cancelled and will not be
retrieved even after the power is restored.
TIMER ON
• The unit will turn on prior to the set time to allow the room to reach the desired temperature by the
programmed time. (Awaking function)
AH-XP18SHV-1 (A889)_EN.indd EN-9
AH-XP18SHV-1 (A889)_EN.indd EN-9
TIMER ON
1
Press the TIMER ON button and
set the time as desired.
) will light
• The orange TIMER lamp (
up.
• The timer setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
) will turn
• The orange TIMER lamp (
off.
1
CANCEL
EN-9
) will light
) will turn
1
CANCEL
11/8/2559 BE 2:36 PM
11/8/2559 BE 2:36 PM

Publicité

Table des Matières
loading

Table des Matières