endolite Elite 2 Instructions D'utilisation page 9

9 Assembly Instructions
1
carrier
Assemble heel spring onto carrier, use Loctite
243 (926012) and torque to 15Nm. Use special
Allen wrench 940080, Torque spanner adaptor
940081 or 13A/F spanner 940273.
3
Unwrap glide sock over heel spring as shown.
5
Push toe spring forward as far as possible.
2
glide
sock
heel
spring
Slide toe spring into position on carrier (do
not assemble bolts). Fold the glide sock neatly
around the end of the toe
4
If a foam cosmesis is to be fitted, roughen top
surface of foot shell to provide ideal bonding
surface.
6
Slide carrier/heel spring assembly forward into
slot in top of foot shell.
9
unwrap the
glide sock
onto the toe
spring
slot in
foot shell
938223/11-1214