endolite Elite 2 Instructions D'utilisation page 10

9 Assembly Instructions
7
Slide a metal shoe horn between heel spring and
back of foot shell opening and lever the spring
down into the foot shell.
9
heel spring
location slot
Press heel spring into location in shell as shown.
11
Bond foam cosmesis to top surface of the foot
shell as shown using Thixofix adhesive (926204)
or equivalent and shape to suit.
(continued)
8
toe spring location
in foot shell
30mm
below heel
Push toe spring towards carrier. Ensure glide sock
doesn't get trapped between the spring and
carrier. Push spring into location in shell.
10
Attach the toe spring to the carrier using Loctite
243 (926012) on the bolts.
1. For spring rates 1 to 7 use 4 A/F Allen wrench
and torque to 15Nm. Do not use external
hex, this is reserved for loosening the bolt, if
required.
2. For spring rates 8 and 9 use 13 A/F spanner
and torque to 25Nm.
10 938223/11-1214