Tools Needed; Installing The Water Line; Connecting The Water Line - Midea Mrf27I6Bst Manuel D'utilisation

Tools Needed

Installing the Water Line

WARNING: Connect to potable water supply only.
Water line installation kits are available as an additional accessory from your dealer or at a local
hardware store.

Connecting the water line

1. First, shut off the main water supply line and
turn off the ice maker.
2. Locate the nearest cold water supply valve.
3. After connecting the water supply to the
water valve, turn your main water supply back
on and flush several gallons of water to clear
the water supply line.
EN
The minimum inlet water pressure: 276 KPa
(40 psi).
The maximum inlet water pressure: 689 KPa
(100 psi).
Connecting the water line to refrigerator
There are several items that you need to
•
purchase to complete this connection.
You will find these items sold as a kit at your
•
local hardware store.
1. First, close the main water supply and locate
the nearest cold water line.
2. Second, connect the water valve to the cold
water line.
3. Turn water valve on and check for any
leakage.
4. When moving the refrigerator, you can hang
the power cord on the power cord hook.
Adjustable Wrench Pliers
Cold water line
Pipe clamp
Shut-off valve
Water line installation kit
08
Power cord hook
Water line
Water line
Water connector