Replacing The Light; Cleaning The Shelf - Midea Mrf27I6Bst Manuel D'utilisation

Replacing the Light

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.
Cleaning the Door Bin
Because the bin is securely installed, you need to
>
alternately lift the left and right ends of the bin from
below to remove it.
After washing the bin having been taken out,
>
you can adjust its installing height to suit your
requirements.
Cleaning the Glass Shelf
Hold the front end of the glass shelf with both
>
hands and rotate it in the direction of the arrow until
the back end is lifted.
Grasp the shelf with both hands and slowly slide it
>
towards you.
Rotate the shelf as indicated by the arrow in the
>
diagram and completely remove it.

Cleaning the Shelf

Separate the two adjustable shelves from the
>
middle to the sides.
Then tilt the front end of the shelf you want to
>
remove up until it is disengaged from the other
shelf.
Gently wipe the area that needs to be cleaned with
>
a damp cloth.
When assembling, tilt the front end of the shelf up
>
and place the hook of the shelf in the slot at the
desired height.
2
23
1
3
EN