Important Details For Your Information - Tecsis S2350 Instructions De Service

1. Important details for your information

1. Important details for your information
Copyright
All rights to these operating instructions are reserved. These operating instructions, including
extracts thereof, must not be copied or translated into other languages without our written per-
mission.
Read these operating instructions without fail before installing and starting
the pressure switch.
Keep the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications.
If questions remain regarding a specific application, you can obtain further information:
Via our Internet address www.tecsis.de
„
The product data sheet is designated as DD/DE 776, DD/DE 779.
„
Contact tecsis for additional technical support +49 69 5806-9542
„
With special model number, please note specifications in the delivery note.
If the serial number gets illegible (e.g. by mechanical damage or repainting), the retraceability of
the instrument is not possible any more.
tecsis pressure switches are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment.
Use of the product in accordance with the intended use S2350 (SC350), S2360 (SC360),
S2400 (SC400), S2410 (SC410), S2420 (SC420):
Use the pressure switch to transform the pressure into an electrical signal.
Knowledge required
Install and start the pressure switch only if you are familiar with the relevant regulations and
directives of your country and if you have the qualification required. You have to be acquainted
with the rules and regulations on measurement and control technology and electric circuits,
since this pressure switch is „electrical equipment" as defined by EN 50178. Depending on the
operating conditions of your application you have to have the corresponding knowledge, e.g. of
aggressive media.
Betriebsanleitung / Operating manual / Instructions de service / Instrucciones de uso
GB
21