Changing Over Door Hinges - Electrolux EK 226 RE WE Mode D'emploi

Installing in a kitchen unit
• Clip covers into place.
• Slide the attachment element
into the rail underneath the
appliance on the handle side
on the left or right, depending
on which side the handle is.
Screw into place with screw
3.5 x 11.
• Slide the appliance into the
recess.
Fastening in the recess
Fasten the appliance in the recess
- with the attachment profile at the top A1,
- with the hinges at the side A2,
- with the attachment element at the bottom A3.

Changing over door hinges

• Remove bolt .
1
• Tilt door to the front and remove.
3
• Transfer plug .
bl
• Remove cover .
6
• Unscrew top hinge bracket
• Transfer cover to the opposite side.
9
• Unscrew bottom hinge bracket
• Transfer pin on hinge bracket to the opposite side.
7
• Remove cover and plug
2
again.
• Screw lower hinge bracket
• Screw top hinge bracket
5
• Attach cover .
6
• Suspend door on the bottom hinge bracket and close.
• Screw in bolt .
1
Changing the compartment door
• At hinge fold away the cover.
1
• Unscrew hinge and remove the compartment door with the
1
hinge.
• Unscrew the closure .
2
• Close the holes with the plugs
• Rotate the door and closure by 180° and replace on the other
side: Insert the compartment door at the top, put the hinge
in place at the bottom, screw down again and close the cover.
.
5
.
8
and cover the fastening holes
4
into place.
8
on the opposite side into place.
.
3
GB
1
25