Changing Settings Via The Home Connect® App; Activating Bluetooth® Detection; Software Update; Remote Diagnostics - Bosch Nit5063Uc Manuel D'utilisation

en-us Home Connect®
Wi-Fi home network
status
The Wi-Fi home network
has now been saved.
The Wi-Fi home network
has now been saved.
9.5 Changing settings via the
Home Connect® app
You can use the Home Connect® app to change the
settings for the cooking zones and send them to the
cooktop.
Requirement: The cooktop is connected to the home
network and to the Home Connect® app.
Select the setting in the Home Connect® app and send
1.
it to the cooktop.
Follow the instructions in the Home Connect® app.
Settings that you send from the Home Connect® app to
the cooktop must be confirmed on the cooktop.
a As soon as cooking settings are transmitted to a
cooking zone, the display starts to flash, depending on
the setting.
Press to confirm the setting.
2.
To discard the setting, press any other touch field on
3.
the cooktop.
9.6 Activating Bluetooth® detection
This wireless technology enables automatic presence
detection. Provided you are near the cooktop, you no
longer need to confirm settings from your mobile device on
the cooktop. If you send settings to a cooking zone, you
can confirm these from your mobile device. If you send
settings to a cooking zone, you can confirm these directly
from your mobile device. The cooktop is connected to the
Wi-Fi and to the Home Connect app.
Requirements
¡ The cooktop is connected to the home network and to
the Home Connect® app.
¡ Bluetooth is connected to the mobile device.
¡ The user is near the cooktop.
Open the Home Connect® app.
1.
In order to set Bluetooth® detection, follow the
2.
instructions in the Home Connect® app.
1 Available depending on software version. Further information on availability can be found on the website.
16
Action
To pair another appliance,
press and hold ⁠ .
To reset the Wi-Fi home
network settings, press and
hold . If flashes, press
and hold again.
1
9.7 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of
optimization, troubleshooting or security updates.
To do this, you must be a registered
Home Connect® user, have installed the app on your
mobile device and be connected to the
Home Connect® server.
As soon as a software update is available, you will be
informed via the Home Connect® app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start installing
it via the Home Connect® app if you are in your home
network (Wi-Fi). The Home Connect® app informs you
once the installation is successful.
Notes
¡ The software update consists of two steps.
– The first step is the download.
– The second step is the installation on your appliance.
¡ You can continue to use your appliance as normal while
updates are downloading. Depending on your personal
settings in the app, software updates can also be set to
download automatically.
¡ Installation takes a few minutes. You cannot use your
appliance during installation.
¡ We recommend that you install security updates as
soon as possible.
9.8 Remote diagnostics
Customer Service can access your appliance via Remote
Diagnostics if you ask them to do so, if your appliance is
connected to the Home Connect® server and if Remote
Diagnostics is available in the country where you are using
the appliance.
Tip: Further information and details about the availability
of Remote Diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com.
9.9 Data Protection
Please read this information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance
transmits the following types of data to the
Home Connect® server (initial registration):
¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
¡ Security certificate of the Wi-Fi communication module
(to ensure a secure data connection).
¡ The current software and hardware version of your
home appliance.
¡ Status of any previous reset to factory settings.