Philips 51PP9200D/37 Manuel De L'utilisateur page 40

Settings | Installation
Upgrade busy...
Software id: TL32E-234
Loading
Validating
Programming
Settings
Installation 4 Software upgrade
Current software info
Language
Local upgrades/app...
Autoprogram
Weak channel installation
Software upgrade
This allows you to upgrade new TV software if available.
32
Automatic software upgrade procedure
For automatic software upgrade, the "autorun.upg" file should be copy to
the root of the USB portable memory
& Power off your TV and remove all memory devices.
Done é Insert the USB portable memory that contains the downloaded software
upgrade.
Done
" Switch on your TV with the power switch . at the right side of the TV.
' At startup the TV will scan the USB portable memory until it finds the
update content. The TV will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
• You are not allowed to remove the USB portable memory during the software
• In case of a power drop during the upgrade procedure, don't remove the USB
• If you try to upgrade to a software version lower than the current version, a
• If an error occurs during the upgrade you should retry the procedure or contact
( When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch . at the right side of
the TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV software from
your USB portable memory.
Manual software upgrade procedure
2
For a manual software upgrade copy the "autorun.upg" file in a directory
called "Upgrades" located in the root of the USB portable memory.
& Insert the portable memory that contains the downloaded software
upgrade.
é The TV will automatically start the content browser menu. Exit the menu by
pressing the MY CONTENT key.
" Select
applications
The TV will list all compatible images available on the USB portable memory
and display the data for each selected upgrade image.
' Select the correct upgrade image and press the red color button to start
the upgrade.
Your TV will restart and will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
Warning
If you try to upgrade to a software version equal or lower than the current version,
a confirmation will be asked. Downgrading to older software should only be done
in case of real necessity.
( When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch . at the right side of
the TV.
Your TV will start up with the new software.
Warning :
upgrade procedure!
portable memory from the TV. The TV will continue the upgrade as soon as the
power comes back.
confirmation will be asked. Downgrading to older software should only be done in
case of real necessity.
your dealer.
Software Upgrade in the Installation menu. Go to
.
:
Local upgrades/